I made it this far and keep getting errors trying to import the messages. No errors on areafix commands. No errors on authentication. Any clues what I have obviously missed? I am using CRAM-MD5 setting.

My password we agreed upon is working and set for session, fix, and tic. No errors being reported.

here is a screen shot of sbbsecho.log and i did ** out my node info.
2024-12-01 08:01:20 Importing C:\sbbs\fido\nonsecure\00c49df1.pkt (Type 2e, 10.6KB) from 954:895/2 to 954:895/**
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Bad packet detected: C:\sbbs\fido\nonsecure\00c49df1.pkt 2024-12-01 08:01:20 Importing C:\sbbs\fido\nonsecure\00c49df4.pkt (Type 2e, 132.0KB) from 954:895/2 to 954:895/**
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored
2024-12-01 08:01:20 Unauthenticated HNET_HOBBIES EchoMail from 954:895/2 (in the non-secure inbound directory) ignored

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC

---
� Synchronet � Rick's BBS telnet://ricksbbs.synchro.net:23

Re: setting up hobbynet woes
By: Rixter to all on Sun Dec 01 2024 09:18 am

Howdy,

I made it this far and keep getting errors trying to import the messages. No errors on areafix commands. No errors on authentication. Any clues what I have obviously missed? I am using CRAM-MD5 setting.

My password we agreed upon is working and set for session, fix, and tic. No errors being reported.

2024-12-01 08:01:20 Importing C:\sbbs\fido\nonsecure\00c49df1.pkt (Type 2e, 10.6KB) from 954:895/2 to 954:895/**

So if stuff is coming into "nonsecure", then there is issues with authentication.

Make sure the following:
* The "session" password is case sensitive (when using CRAM-MD5) - so make sure your passwords have the same case.

* Also make sure, since Mike run's two networks, that your binkp password is the same for both networks. In the above outbound, your authentication might have passed for 999:*, but might be silently failing for 954:*


...����

---
� Synchronet � AnsiTEX bringing back videotex but with ANSI

Re: setting up hobbynet woes
By: Rixter to all on Sun Dec 01 2024 09:18 am

I made it this far and keep getting errors trying to import the messages. No errors on areafix commands. No errors on authentication. Any clues what I have obviously missed? I am using CRAM-MD5 setting.

My password we agreed upon is working and set for session, fix, and tic. No errors being reported.

here is a screen shot of sbbsecho.log and i did ** out my node info. 2024-12-01 08:01:20 Importing C:\sbbs\fido\nonsecure\00c49df1.pkt (Type 2e, 10.6KB) from 954:895/2 to 954:895/**
2024-12-01 08:01:20 Unauthenticated HNET_HAM_RADIO EchoMail from 954:895/2 (in the non-secure inbound directory) ignored

You're receiving echomail in your non-secure inbound directory (and they're ignored by SBBSecho consequently). That suggests that your BinkP session was not authenticated (i.e. with a password).
--
digital man (rob)

Steven Wright quote #20:
If Barbie is so popular, why do you have to buy her friends?
Norco, CA WX: 73.8�F, 21.0% humidity, 9 mph W wind, 0.00 inches rain/24hrs
---
� Synchronet � Vertrauen � Home of Synchronet � [vert/cvs/bbs].synchro.net

Re: setting up hobbynet woes
By: Rixter to all on Sun Dec 01 2024 09:18 am

Howdy,

So if stuff is coming into "nonsecure", then there is issues with authentication.

Make sure the following:
* The "session" password is case sensitive (when using CRAM-MD5) - so make sure your passwords have the same case.

* Also make sure, since Mike run's two networks, that your binkp password is the same for both networks. In the above outbound, your authentication might have passed for 999:*, but might be silently failing for 954:*

...����

---
� Synchronet � AnsiTEX bringing back videotex but with ANSI

I should say the areafix login and requests are generating error level 0. There is obviously an authentication error somewhere. My password is 7 numbers and it works for areafix. I asked mike to change it to a mix of numbers and letters today. Maybe that is the fix to the problem. It's got me aggravated because setting up fsxNet was a 20 minute fast setup and running deal. Thanks for writing back to me.

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC

---
� Synchronet � Rick's BBS telnet://ricksbbs.synchro.net:23

Re: setting up hobbynet woes
By: Rixter to all on Sun Dec 01 2024 09:18 am

You're receiving echomail in your non-secure inbound directory (and they're ignored by SBBSecho consequently). That suggests that your BinkP session was not authenticated (i.e. with a password).
--
digital man (rob)

Steven Wright quote #20:
If Barbie is so popular, why do you have to buy her friends?
Norco, CA WX: 73.8�F, 21.0% humidity, 9 mph W wind, 0.00 inches rain/24hrs ---
� Synchronet � Vertrauen � Home of Synchronet �
[vert/cvs/bbs].synchro.net

I guess even if the areafix login password works with error level 0 it can be bad for the messages packets? Do you think mike at hobbynet set my passwords up incorrectly? I had it agreed on as 7 numbers, I asked him to change it to 8 characters being 4 numbers and 4 capital letters. I have been watching your YouTube video on fidonet set. I hope it helps. Thanks for your help!

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC

---
� Synchronet � Rick's BBS telnet://ricksbbs.synchro.net:23

Re: setting up hobbynet woes
By: Rixter to Digital Man on Sun Dec 01 2024 08:58 pm

I guess even if the areafix login password works with error level 0 it can be bad for the messages packets?

A session password is different than a packet password which is different than an areafix password.

Do you think mike at hobbynet set my
passwords up incorrectly?

I don't know. You haven't shared any logs snippets to tell us.

I had it agreed on as 7 numbers, I asked him to
change it to 8 characters being 4 numbers and 4 capital letters.

That should not matter.

I have been
watching your YouTube video on fidonet set. I hope it helps. Thanks for your help!

Good luck!
--
digital man (rob)

Sling Blade quote #14:
Karl Childers: Some folks call it a sling blade, I call it a kaiser blade. Norco, CA WX: 60.6�F, 39.0% humidity, 2 mph N wind, 0.00 inches rain/24hrs
---
� Synchronet � Vertrauen � Home of Synchronet � [vert/cvs/bbs].synchro.net

Re: setting up hobbynet woes
By: Rixter to deon on Sun Dec 01 2024 08:51 pm

Howdy,

I should say the areafix login and requests are generating error level 0. There is obviously an authentication error somewhere. My password is 7 numbers and it works for areafix. I asked mike to change it to a mix of numbers and letters today. Maybe that is the fix to the problem. It's got me aggravated because setting up fsxNet was a 20 minute fast setup and running deal. Thanks for writing back to me.

I think DM replied.

Your "session" password is used for BINKP sessions - which is the issue here because mail is going in the "unsecure" dir.

Areafix, Filefix and packet passwords are *not* used during BINKP sessions - they are for other things, so you can ignore those for now and focus on your ensuring your session passwords match *exactly* with Mike. (And if you have both health and hobbynet addresses, make sure they are exactly the same.)


...����

---
� Synchronet � AnsiTEX bringing back videotex but with ANSI

Re: setting up hobbynet woes
By: Rixter to deon on Sun Dec 01 2024 08:51 pm

Howdy,

I think DM replied.

Your "session" password is used for BINKP sessions - which is the issue here because mail is going in the "unsecure" dir.

Areafix, Filefix and packet passwords are *not* used during BINKP sessions - they are for other things, so you can ignore those for now and focus on your ensuring your session passwords match *exactly* with Mike. (And if you have both health and hobbynet addresses, make sure they are exactly the same.)

...����

---
� Synchronet � AnsiTEX bringing back videotex but with ANSI

Mike got it fixed, getting lots of messages now. Thanks.

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC

---
� Synchronet � Rick's BBS telnet://ricksbbs.synchro.net:23

Re: setting up hobbynet woes
By: Rixter to Digital Man on Sun Dec 01 2024 08:58 pm

A session password is different than a packet password which is different than an areafix password.

I don't know. You haven't shared any logs snippets to tell us.

That should not matter.

Good luck!
--
digital man (rob)

Sling Blade quote #14:
Karl Childers: Some folks call it a sling blade, I call it a kaiser blade. Norco, CA WX: 60.6�F, 39.0% humidity, 2 mph N wind, 0.00 inches rain/24hrs ---
� Synchronet � Vertrauen � Home of Synchronet �
[vert/cvs/bbs].synchro.net

Mike at hobby network got it fixed. I have lots of messages to catch up on now. Thank you.

telnet://ricksbbs.synchro.net:23
http://ricksbbs.synchro.net:8080
Madison,NC

---
� Synchronet � Rick's BBS telnet://ricksbbs.synchro.net:23